Prodigy Autocode Uživatelský manuál stáhnout pdf (Strana 11)

Diagnostic Devices, Inc. www.prodigymeter.com

Prodigy Talking Meter Owner’s Manual

Diagnostic Devices, Inc. 1.800.243.2636

Prodigy Talking Meter Owner’s Manual

Performing a Control Solution Test

Startwiththemeteroff.

STEP 1: Insert Test Strip

Insert a test strip with the contact bar end

entering into the test slot ﬁrst. Push the test

strip as far as it will go without bending it. The

meter turns on automatically.

See Figure 18.

STEP 2: Mark as a Control Solution Test

After the “ ” symbol appears on display,

press the “M” button and a control solution

bottle symbol appears on display. With the

control solution bottle symbol on the the

display, the meter will not store your test

result in the memory. If you decide not to

perform a control solution test, press

the “M” button again and the control

solution bottle symbol will disappear.

See Figure 19.

Important: Be sure that you are in

 ControlSolutionModesothatthetest

result will not be stored in the meter

memory.

Figure 19

Figure 18

Important Control Solution Test Information

•UseonlyProdigy

ControlSolutions.

•Checktheexpirationdateonthecontrolsolutionbottle.

Do not use if expired.

•ControlSolution,meterandteststripsshouldcometo 

 roomtemperature(68-77°F/20-25°C)beforetesting.

•Usewithinaperiodof90daysfromthedatethatyourst

 openit.Recordthediscarddateonthecontrolsolution 

bottle and discard after 90 days.

•Storethecontrolsolutiontightlyclosedattemperatures 

 below86°F(30°C).Donotrefrigerate.

Important: Prodigy

’sControlSolutionrangesare

located on the back of the test strip vial. They are not

recommended target ranges for your blood glucose level.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Komentáře k této Příručce

Žádné komentáře

Prodigy Autocode Uživatelský manuál Strana 11

Komentáře k této Příručce

Související produkty a manuály pro Měření, testování a kontrola Prodigy Autocode