Prodigy Autocode Uživatelský manuál stáhnout pdf (Strana 16)

Diagnostic Devices, Inc. www.prodigymeter.com

Prodigy Talking Meter Owner’s Manual

Diagnostic Devices, Inc. 1.800.243.2636

Prodigy Talking Meter Owner’s Manual

The 14-day average is calculated from the

blood glucose test results obtained during

the last 14 days. See Figure 37.

It, too, indicates how many blood glucose

tests have been performed, e.g., 41

(41testsinthelast14days).The28-day

averages show the same information.

STEP 3: Recalling Individual Test Results

After the 28-day average, the most recent

test result with date and time will be shown.

Press the “M” button once and the next

most recent test result will appear. Each

time you press and release the “M” button,

the meter will recall up to your last 120 test

results in order. When the memory is full, the

oldest test result is dropped as the newest is

added.After reaching the last set of results,

the meter will turned automatically.

See Figure 38.

STEP 4: Exit the Memory Mode

Press and hold the “M”buttonforthree(3)secondstoturn

off the meter.

Important: If you do not press any button for three

 (3)minutes,themeterwilldisplay“OFF” and turn

off automatically.

The Prodigy AutoCode

Meter stores a maximum of the 120

most recent blood glucose test results with date and time in

its memory. It also provides you with 7, 14, 21 and 28 day

averagesofyourbloodglucosetestresults.Youcanreview

the individual or average test results by entering the memory

mode.

STEP 1: Enter the Memory Mode

While the meter is turned off, press the

“M” button twice. The 7-day average will

appear, indicating that you are in the

memory mode. If you continue to press the

“M” button, the 14 and 28-day averages

willappearinorder.Youcanthenreview

the last 120 individual test results in

memory. When using the meter for the ﬁrst

time, “- - -” appears, indicating no test results

are in the memory. See Figure 35.

STEP 2: Recalling Average Test Results

The 7-day average is calculated from the

blood glucose results obtained during the

last 7 days. It also indicates how many

blood glucose tests have been performed

withinthisperiod,e.g.,21(21testsinthe

last7days).See Figure 36.

Figure 38

Using the Meter Memory

Figure 35

Figure 36

Figure 37

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Komentáře k této Příručce

Žádné komentáře

Prodigy Autocode Uživatelský manuál Strana 16

Komentáře k této Příručce

Související produkty a manuály pro Měření, testování a kontrola Prodigy Autocode